ATP Value-Tube LDPE Plastic Tubing, Black, 1/8″ ID x 1/4″ OD, 100 feet Length


#ad
#ad
Advanced Technology Products (ATP) #ad - Linear low density polyethylene tubing, lightweight and flexible. Atp value-tube linear low density polyethylene tubing. It perfect for food and beverage piping. It is made from 100 percent non-toxic ingredients. It's inert nature and fda compliant status makes it perfect for food and beverage piping not requiring NSF certification.

It is ideal for use in pneumatic, drain piping, lab use and chemical transfer applications which require an inexpensive tubing. Ideal for use in pneumatic, drain piping, lab use and chemical transfer applications which require an inexpensive tubing. For use with barb-type, Technifit push-to-connect or compression-style fittings.

ATP Value-Tube LDPE Plastic Tubing, Black, 1/8" ID x 1/4" OD, 100 feet Length #ad - It is highly-resistant to stress cracking from chemicals, ageing and ultraviolet exposure. It is highly-resistant to stress cracking from chemicals, ageing and ultraviolet exposure. Value-tube is made from 100 percent non-toxic ingredients, meets FDA requirements.

More information about Advanced Technology Products (ATP) #ad

ATP Value-Tube LDPE Plastic Tubing, Black, 1/4" ID x 3/8" OD, 100 feet Length

#ad
#ad
Advanced Technology Products (ATP) PE38ABK #ad - It is highly-resistant to stress cracking from chemicals, ageing and ultraviolet exposure. It is made from 100 percent non-toxic ingredients. Ideal for use in pneumatic, drain piping, lab use and chemical transfer applications which require an inexpensive tubing. It is ideal for use in pneumatic, drain piping, lab use and chemical transfer applications which require an inexpensive tubing.

It's inert nature and fda compliant status makes it perfect for food and beverage piping not requiring NSF certification. Atp value-tube linear low density polyethylene tubing. For use with barb-type, Technifit push-to-connect or compression-style fittings. Linear low density polyethylene tubing, lightweight and flexible.

ATP Value-Tube LDPE Plastic Tubing, Black, 1/4" ID x 3/8" OD, 100 feet Length #ad - It perfect for food and beverage piping. It is highly-resistant to stress cracking from chemicals, ageing and ultraviolet exposure. Value-tube is made from 100 percent non-toxic ingredients, meets FDA requirements.

More information about Advanced Technology Products (ATP) PE38ABK #ad


Similar products



1/4" Tube OD x 1/4" NPT Thread Pack of 10 - PneumaticPlus PC-1/4-N2 Push to Connect Tube Fitting, Male Straight

#ad
#ad
PneumaticPlus #ad - Elliptical sleeve configuration is ideal for easy to push and release the tubing. 1/4" tube od x 1/4" nPT Thread. Pneumaticplus offers composite fittings in wide range of sizes, body styles and thread types for various pneumatic applications. It perfect for food and beverage piping. Ideal for use in pneumatic, drain piping, lab use and chemical transfer applications which require an inexpensive tubing.

Fluid type: Air Only. Linear low density polyethylene tubing, lightweight and flexible. Applicable Tube: Polyurethane and Nylon. Body style: Male Straight. Value-tube is made from 100 percent non-toxic ingredients, meets FDA requirements. It is highly-resistant to stress cracking from chemicals, ageing and ultraviolet exposure.

More information about PneumaticPlus #ad


Similar products



Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1/4 inch od Push Fit Fittings Tube Fittings Push Lock 1/4 inch tee

#ad
#ad
Utah Pneumatic #ad - Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. It perfect for food and beverage piping. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PA / PE / PVC. Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. The tube fitting is prohibited if water temperature is above 60'C 4.

Value-tube is made from 100 percent non-toxic ingredients, meets FDA requirements. Never apply tube joint with additional external loadbending, twist or pulling, otherwise damage or leakage will be occurred. Caution check the end of tubing for a right angle cutting and check the external surface of tubing for any damage or scratch.

Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1/4 inch od Push Fit Fittings Tube Fittings Push Lock 1/4 inch tee #ad - Please refer to following instruction in connection of tubing. When you insert the air tubing into the joint, you will have two-step feeling. Section one is locking claw and section two is sealing ring. Must insert tube into section two. Sleeve is used in tubing connection and disconnection. The sleeve is designed as an oval shape, which is covienient in assembly and disassembly.

However, round sleeve is available to met any special demand the product has limited space for oval sleeve.

More information about Utah Pneumatic #ad


Similar products



ATP IMBIBE NSF 61 Polyethylene Plastic Tubing, Blue, 11/64" ID x 1/4" OD, 100 feet Length

#ad
#ad
Advanced Technology Products (ATP) #ad - Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. Good dielectric properties. It perfect for food and beverage piping. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PE / PA / PVC. Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET.

Body style: Male Straight. Linear low density polyethylene tubing, lightweight and flexible. Ideal for use in pneumatic, drain piping, lab use and chemical transfer applications which require an inexpensive tubing. Value-tube is made from 100 percent non-toxic ingredients, meets FDA requirements. Type:air hose fittings/push fit/Push to connect tee shape Weight: 2.

ATP IMBIBE NSF 61 Polyethylene Plastic Tubing, Blue, 11/64" ID x 1/4" OD, 100 feet Length #ad - 7 ounces/size:1/4 inch od. Applicable Tube: Polyurethane and Nylon. Atp imbibe nsf-61 polyurethane LLDPE tubing. Applications: food and beverage, drain lines, instrumentation, process control, water conditioners, pneumatic piping, pneumatic tools, chemical transfer, electrical jacketing, water purification, laboratories, ice makers and misting systems.

Elliptical sleeve configuration is ideal for easy to push and release the tubing. Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing. Chemically inert and chemical resistant.

More information about Advanced Technology Products (ATP) #ad


Similar products



utah pneumatic 10 Pack Plastic Push to Connect Fittings Tube Connect 1/4 inch Straight od Push Fit Fittings Tube Fittings Push Lock 1/4" Straight

#ad
#ad
Utah Pneumatic #ad - Impermeable to gases. Except air and water, don't attempt to use the fittings on other fluids 2. User's Guide 1. It perfect for food and beverage piping. The tube fitting is prohibited where spark and fire might be occurred 3. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PA / PE / PVC. Proof pressure:| 120psi.

Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. Never apply tube joint with additional external loadbending, twist or pulling, otherwise damage or leakage will be occurred. Caution check the end of tubing for a right angle cutting and check the external surface of tubing for any damage or scratch.

utah pneumatic 10 Pack Plastic Push to Connect Fittings Tube Connect 1/4 inch Straight od Push Fit Fittings Tube Fittings Push Lock 1/4" Straight #ad - Please refer to following instruction in connection of tubing. When you insert the air tubing into the joint, you will have two-step feeling. Section one is locking claw and section two is sealing ring. Must insert tube into section two. Sleeve is used in tubing connection and disconnection. The sleeve is designed as an oval shape, which is covienient in assembly and disassembly.

However, round sleeve is available to met any special demand the product has limited space for oval sleeve. After connection of tube joint and tubing, always try to pull tubing and ensure its firm connection.

More information about Utah Pneumatic #ad


Similar products



PneumaticPlus PL-1/4-N1 Push to Connect Tube Fitting, Male Elbow - 1/4" Tube OD x 1/8" NPT Thread Pack of 10

#ad
#ad
PneumaticPlus #ad - Fluid type: Air Only. Fluid:air, vacuum, water pressure range:0-1mpa120 psi max pressure:1. 5 mpa temperature range 0-60'c applicable Tube:PU/NYLON/Soft PE hose. Quick installation, simple and flexible, space-saving. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PE / PA / PVC. Proof pressure:| 120psi.

Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. Fluid type: Air Only. Meets fda requirements and NSF-61 certified. Body style: Male Straight. Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. It is highly-resistant to stress cracking from chemicals, ageing and ultraviolet exposure.

PneumaticPlus PL-1/4-N1 Push to Connect Tube Fitting, Male Elbow - 1/4" Tube OD x 1/8" NPT Thread Pack of 10 #ad - Ideal for use in pneumatic, drain piping, lab use and chemical transfer applications which require an inexpensive tubing. Good dielectric properties. Applicable Tube: Polyurethane and Nylon. Chemically inert and chemical resistant. It perfect for food and beverage piping.

More information about PneumaticPlus #ad


Similar products



10 Pieces pneumatic 1/4" Tube x 1/8" NPT Swivel "L" push to connect fitting

#ad
#ad
Liberty Pneumatics #ad - This product comes with 2 warranties: 1 Our 14 day no questions ask warranty. Elliptical sleeve configuration is ideal for easy to push and release the tubing. 1/4" tube od x 1/8" nPT Thread. The tube fittings come in a wide variety of models to meet all your needs in penumatic piping. Even after installation, the direction of tubing can be changed freely.

Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. The release ring adapts the ellipse design to make it more convenient and laborsaving for disconnector. All taper thereads are pre-coated with Teflon with fine seal performance. All fitting s equipped with the internal hexagonal holes.

10 Pieces pneumatic 1/4" Tube x 1/8" NPT Swivel "L" push to connect fitting #ad - It's easy for them to be mounted in narrow place. Body style: Male Elbow. Lightweight and flexible. Impermeable to gases. Auction is for 10 pieces 1/4" od tube x 1/8" NPT Swivel elbow push to connect fitting. Please note that the fittings swivel to allow for alignment of tubing connector after the threads have been tightened.

They are not rotary unions and should not be used to rotate in use.

More information about Liberty Pneumatics #ad


Similar products



PneumaticPlus PC-1/4-N1 Push to Connect Tube Fitting, Male Straight - 1/4" Tube OD x 1/8" NPT Thread Pack of 10

#ad
#ad
PneumaticPlus #ad - Meets fda requirements and NSF-61 certified. 1/4" tube od x 1/8" nPT Thread. Impermeable to gases. Body style: Male Straight. Fluid type: Air Only. 1/4" tube od x 1/4" nPT Thread. It perfect for food and beverage piping. Applicable Tube: Polyurethane and Nylon. Applicable Tube: Polyurethane and Nylon. Type:air hose fittings/push fit/Push to connect tee shape Weight: 2.

7 ounces/size:1/4 inch od. 1/4" tube od x 1/8" nPT Thread. Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing. Fluid type: Air Only. Fluid:air, vacuum, water pressure range:0-1mpa120 psi max pressure:1. 5 mpa temperature range 0-60'c applicable Tube:PU/NYLON/Soft PE hose.

PneumaticPlus PC-1/4-N1 Push to Connect Tube Fitting, Male Straight - 1/4" Tube OD x 1/8" NPT Thread Pack of 10 #ad - Quick installation, simple and flexible, space-saving. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PA / PE / PVC. Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. Chemically inert and chemical resistant.

More information about PneumaticPlus #ad


Similar products



10 Pcs 1/4" Tube x 1/4" NPT push to connect fitting

#ad
#ad
Liberty Pneumatics #ad - Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing. Fluid type: Air Only. 10 pieces 1/4" tube x 1/4" npt push to connect fitting this acution is for 10 pieces of: brand new push to connect one touch straight fittings 1/4 " OD Tubing x 1/4 Male NPT Specifications: Tube size: 1/4" OD Thread size: 1/4 MNPT Threads come with thread sealant on them.

2 this comes with a 1 year warranty for workmanship and product serviceability. Body style: Male Straight. This product comes with 2 warranties: 1 Our 14 day no questions ask warranty. Ideal for use in pneumatic, drain piping, lab use and chemical transfer applications which require an inexpensive tubing. The release ring adapts the ellipse design to make it more convenient and laborsaving for disconnector.

10 Pcs 1/4" Tube x 1/4" NPT push to connect fitting #ad - All taper thereads are pre-coated with Teflon with fine seal performance. All fitting s equipped with the internal hexagonal holes. It's easy for them to be mounted in narrow place. Body style: Male Elbow. Applicable Tube: Polyurethane and Nylon. If you with 14 days of receipt, you decide for any reason that you want to return this item, simply a contact us to let us know and b ship it back to us and we will give you a full refund if the item is in like new condition upon receipt.

More information about Liberty Pneumatics #ad


Similar products



ATP Value-Tube LDPE Plastic Tubing, Natural, 1/8" ID x 1/4" OD, 100 feet Length

#ad
#ad
Advanced Technology Products (ATP) #ad - It is made from 100 percent non-toxic ingredients. Atp value-tube linear low density polyethylene tubing. It is highly-resistant to stress cracking from chemicals, ageing and ultraviolet exposure. Linear low density polyethylene tubing, lightweight and flexible. 1/4" tube od x 1/4" nPT Thread. Body style: Male Straight.

For use with barb-type, Technifit push-to-connect or compression-style fittings. Body style: Male Straight. Elliptical sleeve configuration is ideal for easy to push and release the tubing. 1/4" tube od x 1/8" nPT Thread. Impermeable to gases. The release ring adapts the ellipse design to make it more convenient and laborsaving for disconnector.

ATP Value-Tube LDPE Plastic Tubing, Natural, 1/8" ID x 1/4" OD, 100 feet Length #ad - All taper thereads are pre-coated with Teflon with fine seal performance. All fitting s equipped with the internal hexagonal holes. It's easy for them to be mounted in narrow place. Body style: Male Elbow. Value-tube is made from 100 percent non-toxic ingredients, meets FDA requirements. It perfect for food and beverage piping.

More information about Advanced Technology Products (ATP) #ad


Similar products