Motorcycle LED Turn Signal Tail Brake Integrated Light


#ad
#ad
KINGSHOW 6244059 #ad - Please note, our this style are double led chip, the Brake light are 32LED, . Size of led strips: 190mm*14mm 2. Length: of wires almost 48 inches Specification : 1. High quality flexible rubber to easy to mount to curved fenders and hard to mount places add style and brighten your bike Super bright 3528 LED chip is 8 times brighter than original incandescent bulbs F: Installs easily, Mount Almost Anywhere with tape Low temperature, Low Power Consumption, DC 12V & lasts up to 50k hours.

Please note, our this style are double led chip, total 48 led chip 8 amber turn signal 32 brake and tail light 8amber turn signals each led light consists of 1 strip of super bright 3528smd chips description : a: this auction features a brand new SMD 3528 led turn Signal Brake light and Running tail Light all in one for motorcycle B: The Size of the Led Turn Signal brake Tail light is approx 7inches in length Led are 3/16 of an inch Apart C:32 SMD LED Total 8 Amber Turn Signal 32 Brake and Tail light 8Amber Turn Signals Each led light consists of 1 strip of super Bright 3528SMD chips, the Brake light are 32LED, this 3528 Led has 45-50lm which 2.

5 times than the standard 3528led chip, never rust d: these led light strips are used for, waterproof, Superb quality in a low-profile design, the housing provides superior lighting performance, Trailer lights lots of common use E: Brand New-SMD 3528 LED Light Turn Signal Brake light. These led light strips are used for motorcycle.

Motorcycle LED Turn Signal Tail Brake Integrated Light #ad - . The size of the led turn Signal brake Tail light is approx 7inches in length. Total 48 led chip 8 amber turn signal 32 brake and tail light 8Amber Turn Signals Each led light consists of 1 strip of super Bright 3528SMD chips. 5 wires: black wire -- common ground; red wire -- brake light; yellow wire -- left turning; Green wire - right turning; white wire - Running packing in white box New smd led turn signal Brake light and Running tail Light all in one for motorcycle.

More information about KINGSHOW 6244059 #ad

Kawell Rear View Side Mirror Round Bar End Convex Hawk-eye Motorcycle Mirror For 7/8" Handle Bars Fits Most Harley Davidsons Suzuki Honda Kawasaki Cruisers

#ad
#ad
KAWELL OT-20160229-01 #ad - Unique look and Great Visibility. High quality 6061 billet Aluminum Light Weight Bar End Mirrors. We are sure to help you solve the issue you met. Please contact us before leaving a bad review or feedback. Kawell - let hi-tech Light up Your Way. Brand: kawell | Color: Black. Comes with 7/8" bar end Insert Bushing or Directly Clamp-on.

Description: these mirrors will fit most motorcycles with 7/8 bars or clip ons with hollow bar ends if you remove your bar ends and find it has a threaded nut inside you can drill it out to make these work This is universal so please determine if this will fit before purchase Features: Adjustable Mirror Angle Up & Down, Left & Right Mirror Material: Acrylic Color: Black Size: 3 inches diameter convex Material: Billet Aluminum Condition: Brand new in box Instructions: Not included Quantity: 1 pair left and right Package includes: A pair of mirrors Ring kit Please kindly note: Only buy it from KAWELL store can you get the best customer service and quality products of our brand.

Kawell Rear View Side Mirror Round Bar End Convex Hawk-eye Motorcycle Mirror For 7/8" Handle Bars Fits Most Harley Davidsons Suzuki Honda Kawasaki Cruisers #ad - . Crafted from Aluminum with Vibration Resistant Housing.

More information about KAWELL OT-20160229-01 #ad


Similar products



50W 6Ohm LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights Fix Hyper Flash, Warning Cancellor

#ad
#ad
XKGLOW XK-RE-6-50W #ad - Brand: kawell | Color: Black. A pair of 6 ohm 50w led load resistors for led turn Signal Light Fix or LED License Plate Lights Error Fix. This will solve led related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications. Crafted from Aluminum with Vibration Resistant Housing.

Comes with 7/8" bar end Insert Bushing or Directly Clamp-on. Will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load. One led resistor is required for each turn signal bulb or each license plate light bulb.

2 pc 50 watt 6ohm load Resistors + 4pc Quick wire Clip. This will solve led related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications. High quality 6061 billet Aluminum Light Weight Bar End Mirrors. Unique look and Great Visibility. One led resistor is required for each turn signal bulb or each license plate light bulb.

50W 6Ohm LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights Fix Hyper Flash, Warning Cancellor #ad - This is a pair of 6 ohm 50w led load resistors for LED Turn Signal Light Fix or LED License Plate Lights Error Fix. These 6 ohm, 50 watt led load resistors will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load.

More information about XKGLOW XK-RE-6-50W #ad


Similar products



Wiipro Universal led Harley Davidson Light Strip Tail Brake Stop Turn Signal 32LED 8" Flexible led light for motorcycle

#ad
#ad
Wiipro 4333006041 #ad - Voltage: dc 12v; waterproof rate: ip 65; Easy Installation: Mount with 3M tape, 5 wires connection. Size: 205*1. 3*08 cm / 8*05*03"; power cable Length: Approx 60cm. Led light color: Red for brake and stop, Amber for turn signal. Crafted from Aluminum with Vibration Resistant Housing. Comes with 7/8" bar end Insert Bushing or Directly Clamp-on.

Will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load. One led resistor is required for each turn signal bulb or each license plate light bulb. 2 pc 50 watt 6ohm load Resistors + 4pc Quick wire Clip. Perfect turn signal brake light and Running tail Light all-in-one for motorcycle, Car, Trailer.

Wiipro Universal led Harley Davidson Light Strip Tail Brake Stop Turn Signal 32LED 8" Flexible led light for motorcycle #ad - . Brand: kawell | Color: Black. Lots of Common uses. Material: soft rubber strip with 3528 SMD LED; Fitting Position: License Plate Light. 32 led run brake turn strip clean up the tail section of you bike by removing huge turn signals or badly designed ornrear brake lights 07-14 honda 600rr perfect for all motorcycles and scooters this strip features: - 120 degree viewing angle 3 chip 3528 leds for wider visibility + safety - industrial strength 3M Self Adhesive Backing - Self Adhesive Backing - Simply Clean Surface & Stick On - Amber Right + Left Turn Signals - Running Light illuminates Red at 1/2 brightness then Full 100% brightness as Brake - 16 gauge Teflon coated wire leads that are 2 feet long - Input voltage of 12 Volts ~ fits Most All Motorcycles Wiring & Installation: - Light bar is a 5-wire hook-up: Running Light, Brake Light, Right Turn, Left Turn, & Ground - Strip is Flexible ~ will conform to many surfaces ~ Limitless Mounting Options High quality 6061 billet Aluminum Light Weight Bar End Mirrors.

A pair of 6 ohm 50w led load resistors for led turn Signal Light Fix or LED License Plate Lights Error Fix.

More information about Wiipro 4333006041 #ad


Similar products



Audew 2-Pin Electronic Turn Signal Flasher Relay Fix Motorcycle Turn Signal Hyper Flash

#ad
#ad
Audew AUDEWQUTsKUs5G #ad - Led light color: Red for brake and stop, Amber for turn signal. Eliminate the need for tapping wires to install the load resistors. This auction feature this 2-pin electronic LED Flasher Relay, works for most motorcycle/bike to fix the LED bulbs related turn signal light hyper flashing, not function properly issues.

A pair of 6 ohm 50w led load resistors for led turn Signal Light Fix or LED License Plate Lights Error Fix. This will solve led related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications. The max power of the relay is 42w, which mean the power of your all LED bulbs must low than 42 W.

Audew 2-Pin Electronic Turn Signal Flasher Relay Fix Motorcycle Turn Signal Hyper Flash #ad - Unique look and Great Visibility. The max power of the relay is 42w, which mean the power of your all LED bulbs must low than 42 W. Work for most motorcycles such as Honda, Suzuki, KTM, Kawasaki, Yamaha and many other brands as well. Directly replace the OEM two-pin flasher. Brand: kawell | Color: Black. Besides, this 2-pin Electronic LED Flasher is also speed adjustable.

Crafted from Aluminum with Vibration Resistant Housing. Make your car outstanding, enjoy your life High quality 6061 billet Aluminum Light Weight Bar End Mirrors.

More information about Audew AUDEWQUTsKUs5G #ad


Similar products



SUNPIE Motorcycle Curved Vertical Side Mount License Plate TAG Holder Bracket FITS All Sport Bikes and Cruisers. Harley Davidson, Kawasaki, Honda,

#ad
#ad
SUNPIE #ad - Lots of Common uses. A pair of 6 ohm 50w led load resistors for led turn Signal Light Fix or LED License Plate Lights Error Fix. This will solve led related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications. Allow led bulbs to blink at the normal rate.

Mounts behind your axle nut, or lower shock bolt. Material: soft rubber strip with 3528 SMD LED; Fitting Position: License Plate Light. Work for most motorcycles such as Honda, Suzuki, KTM, Kawasaki, Yamaha and many other brands as well. Directly replace the OEM two-pin flasher. Comes with 7/8" bar end Insert Bushing or Directly Clamp-on.

SUNPIE Motorcycle Curved Vertical Side Mount License Plate TAG Holder Bracket FITS All Sport Bikes and Cruisers. Harley Davidson, Kawasaki, Honda, #ad - High quality 6061 billet Aluminum Light Weight Bar End Mirrors. Size: 205*1. 3*08 cm / 8*05*03"; power cable Length: Approx 60cm. Unique look and Great Visibility. Completely waterproof design.

More information about SUNPIE #ad


Similar products



Purishion 2x Universal Flexible LED Turn Signal Tail Brake License Plate Light Integrated for Motorcycle Bike ATV Car RV SUV, Brake/Running Tail Light2Pack Amber Red

#ad
#ad
Purishion 4333006042 #ad - Size: 205*1. 3*08 cm / 8*05*03"; power cable Length: Approx 60cm. The max power of the relay is 42w, which mean the power of your all LED bulbs must low than 42 W. Mounts behind your axle nut, or lower shock bolt. Voltage: dc 12v; waterproof rate: ip 65; Easy Installation: Mount with 3M tape, 5 wires connection.

Very easy to install. Lots of common uses, Car, Size: 4. 6*05*035 inch. Waterproof, shock-resistant, dustproof, low consumption. Crafted from Aluminum with Vibration Resistant Housing. If more than 42 W, load resistors may be required. Vertical curved license plate bracket. Work for most motorcycles such as Honda, Suzuki, Kawasaki, KTM, Yamaha and many other brands as well.

Purishion 2x Universal Flexible LED Turn Signal Tail Brake License Plate Light Integrated for Motorcycle Bike ATV Car RV SUV, Brake/Running Tail Light2Pack Amber Red #ad - Directly replace the OEM two-pin flasher. Perfect turn signal brake light and Running tail Light all-in-one for motorcycle, Car, Trailer. Specifications: type: motorcycle light material: rubber, plastic Item Color: As shown LED Quantity: 17 LED Type: 3528 SMD Voltage: DC 12V Size: 4. 6*05*0

More information about Purishion 4333006042 #ad


Similar products



SunplusTrade 2" x 50' Black Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties

#ad
#ad
SunplusTrade #ad - This high quality heat wrap helps reduce heat from high temperature components from your car and motorcycle. The max power of the relay is 42w, which mean the power of your all LED bulbs must low than 42 W. Simply unbolt your axle bolt, slide this into place, and reinstall the axle bolt. Brand: kawell | Color: Black.

Superior Illumination & Stability. Easy to install tape. With our strict quality control system, we test each item and 100% ensure in good condition before we ship. Enjoy 1 year quality warranty under regular use. Offering customer technical service, feel free contact us for technical, installation and use question.

SunplusTrade 2" x 50' Black Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties #ad - 2 inch x 50 feet heat wrap with pack of 6 12" Stainless Steel 304 Locking Zip Ties. The exhaust heat wrap tape can withstand 1400F direct/2000F radiant heat. High resistance to abrasions, oil spills, temperatures and vibration breakdown. Material: soft rubber strip with 3528 SMD LED; Fitting Position: License Plate Light.

Will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load. One led resistor is required for each turn signal bulb or each license plate light bulb. 2 pc 50 watt 6ohm load Resistors + 4pc Quick wire Clip.

More information about SunplusTrade #ad


Similar products



Krator SMI5050 Light Motorcycle Curved Vertical Mount License Plate Holder Black Billet Tag 1" Axle

#ad
#ad
Krator SMI5050 #ad - Crafted from Aluminum with Vibration Resistant Housing. Will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load. One led resistor is required for each turn signal bulb or each license plate light bulb. 2 pc 50 watt 6ohm load Resistors + 4pc Quick wire Clip.

Material: soft rubber strip with 3528 SMD LED; Fitting Position: License Plate Light. Features: vertical curved license plate bracket specification: condition: 100% brand new quantity: 1: black anodized material: billet aluminum instructions: not included fitment: mounts behind your axle nut, or lower shock bolt very easy to install.

High quality 6061 billet Aluminum Light Weight Bar End Mirrors. 17 led integrated led light strip with 8 LED Amber, 9 LED Red /each Strip. Material: soft rubber strip with 3528 smd led; perfect turn signal brake light all-in-one for motorcycle, Trailer. Will fit almost all motorcycles with a 1A€ axle measure before you buy;.

Krator SMI5050 Light Motorcycle Curved Vertical Mount License Plate Holder Black Billet Tag 1" Axle #ad - Voltage: dc 12v; waterproof rate: ip 65; Easy Installation: Mount with 3M tape, 5 wires connection. The thermal heat wrap can reduce heat under hood up to 50%. Machined from billet Aluminum, then Black Anodized for a Long Lasting Finish. Simply unbolt your axle bolt, slide this into place, and reinstall the axle bolt.

More information about Krator SMI5050 #ad


Similar products



Motion Pro Push-Pull Throttle

#ad
#ad
Motion Pro 059-010058 #ad - Work for most motorcycles such as Honda, KTM, Suzuki, Kawasaki, Yamaha and many other brands as well. Directly replace the OEM two-pin flasher. Lots of common uses, Car, Size: 4. 6*05*035 inch. Waterproof, dustproof, shock-resistant, low consumption. Perfect turn signal brake light and Running tail Light all-in-one for motorcycle, Car, Trailer.

Super bright, High Performance LED. Offering customer technical service, feel free contact us for technical, installation and use question. 2 inch x 50 feet heat wrap with pack of 6 12" Stainless Steel 304 Locking Zip Ties. The exhaust heat wrap tape can withstand 1400F direct/2000F radiant heat. High resistance to abrasions, oil spills, temperatures and vibration breakdown.

Motion Pro Push-Pull Throttle #ad - Lots of Common uses. Superior Illumination & Stability. Easy to install tape. With our strict quality control system, we test each item and 100% ensure in good condition before we ship. Enjoy 1 year quality warranty under regular use. Eliminate the need for tapping wires to install the load resistors. Racing cables fit yamaha fZR1000 91-92 with Keihin CR carbs.

More information about Motion Pro 059-010058 #ad


Similar products



15 Amber LED Flush Mount Smoke Turn Signal Indicator Blinker Light Universal For Motorcycle Sport Street Racing Bike

#ad
#ad
LED Turn Signal M03-030-AZO-3 #ad - Racing cables fit yamaha fZR1000 91-92 with Keihin CR carbs. Fitment: for sport bike as Suzuki Honda Yamaha Kawasaki mounting on Fairing with 9mm bolts fitting. 17 led integrated led light strip with 8 LED Amber, 9 LED Red /each Strip. Material: soft rubber strip with 3528 smd led; perfect turn signal brake light all-in-one for motorcycle, Trailer.

Manufactured in China. Not D. O. T. Lens size: 4. 7cm x 3. 2cm 1. 85" x 1. 26". High quality 6061 billet Aluminum Light Weight Bar End Mirrors. A pair of 6 ohm 50w led load resistors for led turn Signal Light Fix or LED License Plate Lights Error Fix. This will solve led related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications.

15 Amber LED Flush Mount Smoke Turn Signal Indicator Blinker Light Universal For Motorcycle Sport Street Racing Bike #ad - Wattage: total 5. 4w; voltage: DC 12V. Mounts behind your axle nut, or lower shock bolt. Die-cast aluminum housing with high-grade steel Allen-head bolts, available with chrome or black epoxy finish. Will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb 2 Amp load.

More information about LED Turn Signal M03-030-AZO-3 #ad


Similar products