As an Amazon Associate I earn from qualifying purchases.
Renogy #ad - Optimized for 12v batteriescompatible with 12V battery banks on the market, including lithium batteries. Multiple battery adaptation Deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready. Remote monitoring the rs232 communication port allows the renogy rover charge controller to communicate with the DC Home app and Renogy ONE M1 via the Renogy BT-1 Bluetooth module highly recommend to add-on.
Wanderer10a|30a installation notes the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch.
Smart 4-stage pwm chargingsmart 4-stage pwm charging bulk, and Equalization increases battery life and improves system performance. Then secure each cable by rotating the screws clockwise CW to the closed position. This will enable you to monitor the status and productivity of your panels on the go. Compact in sizeWhich makes it easy to install virtually anywhere. Intelligent protection against reverse polarity, short-circuit, Float, overcharging, Boost, and reverse current.
Renogy #ad - Warranty5 year warranty and 24/7 technical support team. Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. Excellent performance22% high solar cell efficiency.
This panel is suited for applications that require a smaller footprint, making it a favorite for those with RVs, campers, and more. Multiple protectionrenogy wanderer-li 30a pwm solar charge controller is equipped with multiple electronic protections: overcharging, overload, short-circuit and reversed polarity, which increases battery life and improve system performance.
Easy installationpre-drilled holes and Plug&Play cables on the back allow for fast mounting. Wide application1600wh daily output depends on the 4 hours sunlight availability. Corrosion-resistant aluminum frame for outdoor use, allowing the panels to last for decades as well as withstand high winds 2400Pa and snow loads 5400Pa.
Flutesan #ad - Abs engineering plastic shell: the solar panel charge controller is designed with high strength ABS engineering plastic shell, corrosion resistance and other characteristics, impact resistance, anti aging, high ignition point, effective service life and safety. Safe use: built in overcurrent/ protection function, reverse polarity protection, open circuit protection, do not hurt the panel solar controller, they are self recovery type, more safely applied in home, industry and so on.
Lcd display: the operation of the solar controller high definition display system is clear at a glance, which is clear and intuitive; At the same time, and the display timing settings correspond to the LCD display one by one, one button operation can complete the setting.3
Widely applied: outdoor solar controller with dual usb ports is compatible with 12V/ 24V systems; The 5V/2A USB port supports mobile phone charging or any other 5 voltage devices, suitable for home, industry, which can protect the lithium battery from overcharge and discharge, business and so on.
Renogy #ad - 12v/24v automatically detectautomatically detects 12v or 24v dC system voltages for non-lithium batteries. Intelligent protection against reverse polarity, Float, Boost, and reverse current. Multiple battery adaptation Deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready.
Negative groundthe adventurer is a negative ground controller. Real-time monitoringthe rs232 port can work with the BT-1 Bluetooth module to deliver real-time energy data across the DC Home smart phone app & Renogy ONE M1.
This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. An included surface Mount Attachment allows for versatility in mounting. Any negative connection on the solar module, battery and load can be safely earth grounded as required. The lcd screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.
EEEKit #ad - Easy to use: the charge controller should connect the battery first, then the solar panel, and finally the load! You can change the settings by the simple one-button operation. Please read the manual carefully. Don't worry of the unsatisfied product you received.
The solar controller will turn off automatically once the voltage is too low. Intelligent design: build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out.
Reliable protection: eeekit solar charge regulator provides over-current protection, low voltage and overcharge protection, short-circuit protection, inverse connection protection, a reliable protector for your devices. Wide compatibility: the solar charger controller with 30a rated discharge current is compatible with 12V or 24V system automatically, suitable for lead-acid batteries: OPEN, GEL.
BougeRV #ad - Hook up the battery first, then negative wire. Allows you to see exactly what the controller was doing and how much power is being drawn in from the panels. Including the ability to program the solar charge controller for best charging and maintenance of various battery types. Solar panel regulator: max pv input voltage 55 volts, while most controller can only handle 50 volts PV input.
With setting to li battery type, such as lfp for liFePO4, Li for Ternary lithium battery, this solar charge controller also has a function to jumpstart your lithium battery in case it gets overly discharged. Please note that turn the screwdriver counterclockwise first, positive wire, please note that do not disconnect the battery when the solar panels are active.
The max pv input voltage is higher than most controller, which can produce more power as well. Neat and safe wiring: come with 3 pairs of spade terminals, connect the controller to the solar panel, in order to open up the wire clamp holes. This solar panel regulator can handle 450 watts input for 12 volts battery system, 900 watts input for 24 volts system. With a larger screen and 50% brightness in no operation, the 30A solar panel regulator will cycle the PV input current and the battery voltage on the main interface with real-time value every 3 seconds, the solar charge controller is easy to read in dim light.
HQST HIGH QUALITY SOLAR TECHNOLOGY #ad - It protects against reverse polarity, battery over-discharge, battery overcharge, over-temperature, and short-circuiting. Supporting 12v up to 450w and 24v up to 900w pv systems, water pumps, AGM, sheds, Gel, boats, and more. The lcd screen and settings button allow you to customize parameters and monitor the PV system in real-time.
It also provides self-recovery protection for your PV system. It comes with 6 spade terminals for safer connectivity without shortening the circuit caused by the bare copper wires contacting other terminals. Works with popular batteries: this solar controller works with lifepo4, Flooded, Ternary Lithium, it can be widely applied on motorhomes, and Sealed batteries.
Easy to install and use: there are polarity +/- icons on the charge controller for easy wiring. Intelligent pwm charging: supports smart 3-stage charging bulk, float, which can regulate the flow of electricity to expand the battery's lifespan. For a dormant lithium battery, and equalization for Lead Acid Batteries and 2-stage charging Bulk and Float for Lithium batteries, this PWM solar controller can send low current to activate it. 7-point safety protection: this pwm controller is equipped with dual MOS circuits to prevent reverse current.
Renogy #ad - 4-stage pwm technology: the voyager controller is equipped with advanced smart PWM technology with high charging efficiency. Ip67 rated waterproof: with an ip67 rated waterproof design, rain, the Voyager controller is suitable for outdoor use and will remain fully operational when exposed to water spray, or condensation.
Support multiple battery types: the voyager controller can automatically sense 12V or 24V system voltage when paired with a Gel, AGM, or Flooded batteries.
It also comes with a Lithium activation feature. Multiple protections: the voyager controller has multiple intelligent protections against reverse polarity, overload, over charge, and over discharge, short-circuit, reverse current, keeping your battery fully protected.
1. Renogy
#adWanderer Li 30A, Gel, and Flooded Batteries, Renogy Wanderer Li 30A 12V PWM Negative Ground Solar Charge Controller Solar Panel Regulator w/ Temp Sensor Function Fit for Lithium, Sealed
#adWanderer10a|30a installation notes the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch.
More information #ad
The led indicators allow you to set battery types and check the charging staus with ease. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position. Smart 4-stage pwm chargingsmart 4-stage pwm charging bulk, and Equalization increases battery life and improves system performance. Then secure each cable by rotating the screws clockwise CW to the closed position. This will enable you to monitor the status and productivity of your panels on the go. Compact in sizeWhich makes it easy to install virtually anywhere. Intelligent protection against reverse polarity, short-circuit, Float, overcharging, Boost, and reverse current.
| Brand | Renogy #ad |
| Manufacturer | Renogy #ad |
| Height | 1.76 Inches |
| Length | 6.45 Inches |
| Weight | 0.3 Pounds |
| Width | 4.31 Inches |
| Part Number | RNG-CTRL-WND30-LI |
| Model | Charge Controller |
| Warranty | 1-year material and workmanship warranty |
More information #ad
2. Renogy
#adMarine, Camper, Renogy 400 Watt 12 Volt Monocrystalline Solar Panel Bundle Kit with 4 pcs 100W Panel and 30A Wanderer PWM Charge Controller for RV, Off-Grid Solar Power System, Boats, Trailer
#adThis panel is suited for applications that require a smaller footprint, making it a favorite for those with RVs, campers, and more. Multiple protectionrenogy wanderer-li 30a pwm solar charge controller is equipped with multiple electronic protections: overcharging, overload, short-circuit and reversed polarity, which increases battery life and improve system performance.
More information #ad
Easy installationpre-drilled holes and Plug&Play cables on the back allow for fast mounting. Wide application1600wh daily output depends on the 4 hours sunlight availability. Corrosion-resistant aluminum frame for outdoor use, allowing the panels to last for decades as well as withstand high winds 2400Pa and snow loads 5400Pa.
| Brand | Renogy #ad |
| Manufacturer | Renogy #ad |
| Height | 1.38 Inches |
| Length | 42.2 Inches |
| Weight | 89 Pounds |
| Width | 19.6 Inches |
| Part Number | RNG-KIT-BUNDLE400D |
| Model | 400 Watt 12 Volt |
| Warranty | 5 years Material and Workmanship Warranty |
More information #ad
3. Flutesan
#adSolar Battery Controller 12v/24v Solar Panel Charge Controller Ground Solar Panel Controller Regulator with Adjustable LCD Display and Dual USB Port Timer Setting PWM Auto Parameter2 Pieces,30A
#adLcd display: the operation of the solar controller high definition display system is clear at a glance, which is clear and intuitive; At the same time, and the display timing settings correspond to the LCD display one by one, one button operation can complete the setting.3
More information #ad
30a solar charge controller: this solar battery controller regulator is equipped with industrial grade main control chip, ultra low heat generation, dual MOS anti backflow circuit, with full 3 level PWM charge management, improved system efficiency. Widely applied: outdoor solar controller with dual usb ports is compatible with 12V/ 24V systems; The 5V/2A USB port supports mobile phone charging or any other 5 voltage devices, suitable for home, industry, which can protect the lithium battery from overcharge and discharge, business and so on.
| Brand | Flutesan #ad |
| Manufacturer | Flutesan #ad |
| Part Number | Flutesan-Ground Solar-39 |
More information #ad
4. Renogy
#adAdventurer 30A, Gel, Flooded and Lithium Batteries, Renogy 30A 12V/24V PWM Solar Charge Controller with LCD Display Flush Mount Design Negative Ground, Compatible with Sealed
#adNegative groundthe adventurer is a negative ground controller. Real-time monitoringthe rs232 port can work with the BT-1 Bluetooth module to deliver real-time energy data across the DC Home smart phone app & Renogy ONE M1.
More information #ad
Smart 4-stage pwm chargingsmart 4-stage pwm charging bulk, overcharging, short-circuit, and Equalization increases battery life and improves system performance. Flush mount designdesigned to cleanly flush mount on walls, providing a sleek, integrated look. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. An included surface Mount Attachment allows for versatility in mounting. Any negative connection on the solar module, battery and load can be safely earth grounded as required. The lcd screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.
| Brand | Renogy #ad |
| Manufacturer | Renogy #ad |
| Height | 1.9 Inches |
| Length | 6.56 Inches |
| Weight | 0.6 Pounds |
| Width | 4.5 Inches |
| Part Number | RNG-CTRL-ADV30-LI |
| Model | Adventurer 30A Li 12V/24V |
| Warranty | NEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller. |
More information #ad
5. EEEKit
#adSolar Panel Charger Controller 12V/24V, Multi-Function Adjustable LCD Display with Dual USB Port Timer Setting PWM Auto Parameter, EEEkit 30A Solar Charge Controller
#adThe solar controller will turn off automatically once the voltage is too low. Intelligent design: build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out.
More information #ad
Dual usb 5v/3a output ports support mobile phones, AGM, tablet PCs or other devices that require 5V voltage. We offer a 30-days money-back guarantee and 12-month warranty for quality-related issues. Functional lcd display: intuitive lcd display that can clearly indicate the status and data is able to switch modes and parameter configuration, suitable for home, commercial, industrial, etc. Reliable protection: eeekit solar charge regulator provides over-current protection, low voltage and overcharge protection, short-circuit protection, inverse connection protection, a reliable protector for your devices. Wide compatibility: the solar charger controller with 30a rated discharge current is compatible with 12V or 24V system automatically, suitable for lead-acid batteries: OPEN, GEL.
| Brand | EEEKit #ad |
| Manufacturer | EEEkit #ad |
| Height | 2.5 Inches |
| Length | 7 Inches |
| Width | 13.5 Inches |
| Part Number | H026100-E008135338FBA |
| Model | H026100-E008135338FBA |
More information #ad
6. BougeRV
#adSLD, FLA, with Backlit Display, BougeRV Li 30A PWM Solar Charge Controller 12V 24V, USB Port, Negative Ground Battery Intelligent Regulator for Solar Panels Compatible with LFP, for RV, Off-Gird, AGM
#adWith setting to li battery type, such as lfp for liFePO4, Li for Ternary lithium battery, this solar charge controller also has a function to jumpstart your lithium battery in case it gets overly discharged. Please note that turn the screwdriver counterclockwise first, positive wire, please note that do not disconnect the battery when the solar panels are active.
More information #ad
Easy-read backlit display: to check the pv status and the battery status easily, also has color code icons. Li compatibility: not only compatible with traditional battery, the pwm controller also has clear and special icons for various lithium batteries on the LCD screen, LTO for Lithium-Titanium-Oxide. The max pv input voltage is higher than most controller, which can produce more power as well. Neat and safe wiring: come with 3 pairs of spade terminals, connect the controller to the solar panel, in order to open up the wire clamp holes. This solar panel regulator can handle 450 watts input for 12 volts battery system, 900 watts input for 24 volts system. With a larger screen and 50% brightness in no operation, the 30A solar panel regulator will cycle the PV input current and the battery voltage on the main interface with real-time value every 3 seconds, the solar charge controller is easy to read in dim light.
| Brand | BougeRV #ad |
| Manufacturer | BougeRV #ad |
| Height | 2.17 Inches |
| Length | 6.69 Inches |
| Width | 4.53 Inches |
| Part Number | ISE136 |
| Model | 30A PWM Negative |
| Warranty | Manufacturer warranty for 18 months from date of purchase. |
More information #ad
7. HQST HIGH QUALITY SOLAR TECHNOLOGY
#adHQST 30Amp 12V/24V PWM Solar Charge Controller Regulator with LCD Display, Sealed, Flooded Batteries, Dual USB Ports, for Lithium, Gel
#adIt also provides self-recovery protection for your PV system. It comes with 6 spade terminals for safer connectivity without shortening the circuit caused by the bare copper wires contacting other terminals. Works with popular batteries: this solar controller works with lifepo4, Flooded, Ternary Lithium, it can be widely applied on motorhomes, and Sealed batteries.
More information #ad
Accurate monitoring: adopting an upgraded 32-bit chip, this 30 amp solar charge controller enhances the data processing ability to trace data faster and monitor data more precisely. Easy to install and use: there are polarity +/- icons on the charge controller for easy wiring. Intelligent pwm charging: supports smart 3-stage charging bulk, float, which can regulate the flow of electricity to expand the battery's lifespan. For a dormant lithium battery, and equalization for Lead Acid Batteries and 2-stage charging Bulk and Float for Lithium batteries, this PWM solar controller can send low current to activate it. 7-point safety protection: this pwm controller is equipped with dual MOS circuits to prevent reverse current.
| Brand | HQST HIGH QUALITY SOLAR TECHNOLOGY #ad |
| Manufacturer | HQST Solar #ad |
More information #ad
8. Renogy
#adTrailers, Gel, Used in RVs, Voyager 20A, Renogy Voyager 20A 12V/24V PWM Waterproof Solar Charge Controller w/ LCD Display for AGM, Flooded and Lithium Battery, Boats, Yachts
#adSupport multiple battery types: the voyager controller can automatically sense 12V or 24V system voltage when paired with a Gel, AGM, or Flooded batteries.
More information #ad
It provides 4-stage charging Bulk, Absorption, Float and Equalization in order to protect the battery. Backlit lcd displaying system: the voyager comes with an LCD display showing accurate and timely information including charging current, temperature, generated energy, battery voltage, and error codes that allows users to monitor and control charging. It also comes with a Lithium activation feature. Multiple protections: the voyager controller has multiple intelligent protections against reverse polarity, overload, over charge, and over discharge, short-circuit, reverse current, keeping your battery fully protected.
| Brand | Renogy #ad |
| Manufacturer | Renogy #ad |
| Height | 1.4 Inches |
| Length | 6.08 Inches |
| Weight | 0.55 Pounds |
| Width | 3.83 Inches |
| Part Number | RCC20VOYP-G1 |
| Model | Voyager 20A PWM |
| Warranty | 2-year material and workmanship warranty |
More information #ad
9. GoPower
#adDigital , Go Power! By Valterra GP-PWM-30-UL Solar Controller, 30A, Black
#adGoPower #ad - 30 amp pulse width modulated digital regulator adjustable for Lithium, AGM, wet cell, and gel batteries. Capable of handling 570 watts of solar. Full 4 stage battery bulk absorption and float with an equalize for wet cell batteries. Displays voltage, amperage and battery percentage of charge.More information #ad
| Brand | GoPower #ad |
| Manufacturer | Go Power! #ad |
| Height | 4.5 Inches |
| Length | 8.25 Inches |
| Width | 1.75 Inches |
| Part Number | GP-PWM-30-UL |
| Model | GP-PWM-30-UL |
More information #ad
